A plastic ball and paddles are used to play the well-liked game of pickleball. Paddles for pickleball are a crucial component of the sport, so it’s necessary to keep them secure and protected from harm. Making a pickleball paddle cover is one method of defense. You can find instructions for constructing a pickleball paddle cover on this page.
Material Requirements for Pickleball Paddle Cover
In order to make a pickleball paddle cover, you will need the following materials:
- 1/2 yard of fabric (preferably quilting cotton)
- 1/4 yard of Pellon 809 Decor Bond fusible interfacing
- Scissors
- Pins
- Sewing machine and thread
- Iron and ironing board
First, you will need to cut out your fabric pieces. For the front and back of the paddle cover, you will need two rectangles that measure 18″ x 13″. For the side strip, you will need one rectangle that measures 4″ x 18″. Then, you will need to fuse the interfacing to the wrong side of the fabric according to the manufacturer’s instructions.
Next, you will need to sew the side strip onto one of the long sides of one of the paddle cover rectangles. To do this, first, pin the side strip in place and then sew it on using a 1/4″ seam allowance. After that, you can press the seam open with an iron.
Then, you will need to sew the two paddle cover rectangles together along both long sides and one short side using a 1/2″ seam allowance. Be sure to leave a 3″ opening along one of the short sides so that you can turn the cover right side out later on. After sewing, press all four seams open with an iron.
Process of Sewing the Pickleball Paddle Cover
A. Pinning the Fabric
Pin the two remaining sides together, with the right sides facing each other. Sew a seam along both sides, making sure to back stitch at the beginning and end of each seam.
B. Sewing the Cover
Turn the cover right side out through the zipper opening. Use a pencil or similar object to push out the corners, so they are nice and sharp. Iron the cover so that it is flat and smooth.
C. Finishing the Cover
Finally, trim any loose threads, and your pickleball paddle cover is complete! You can now slip your paddle inside and zip it up to protect it during transport or storage.
Adding Zipper to the Bag
A. Measuring and Cutting the Zipper
Measure the length of the open side of the cover and cut the zipper to the same length. Place the zipper face down along the open side of the cover and pin it in place. Make sure that the zipper teeth line up with the raw edges of the fabric.
B. Pinning and Sewing the Zipper
Using a zipper foot on your sewing machine, sew the zipper in place along both sides. Then, fold the cover in half with the zipper closed and pin the remaining two sides together.
Frequently Asked Questions
A: Measure the paddle’s length and breadth, then add an inch to each measurement to account for seam allowances.
A: While having a basic understanding of sewing is advised, anyone with a little perseverance and practise can construct a pickleball paddle cover.
A: The complexity of the design and your degree of competence will determine how long it takes to construct a pickleball paddle cover. Nevertheless, it usually takes 1-2 hours.
A: Yes, you can use fabric paint, iron-on transfers, or embroidery to add your own unique design to your pickleball paddle covers.
A: Follow the care instructions for the specific type of fabric you used to make your cover. In general, you can spot clean with mild detergent and water and allow it to air dry.
Conclusion
How to choose a good pickleball paddle? By shielding your paddle from nicks and damage, making a pickleball paddle cover is a quick and easy DIY project that may ultimately save you money. You may make a personalized pickleball paddle covers that properly fits your paddle by following the instructions provided in this article. You may enjoy your pickleball game with a well-protected and well-maintained paddle with a little time and effort.